Toyota 8" & 8.4" Nitro Chromoly CTL Axle

Home > Products > Axle Shafts & Kits > Rear Axle, Shaft > Toyota > Toyota 8" >

Toyota 8" & 8.4", Rear 6 lug 30 Spline Cut To Length
Nitro Chromoly Axle Shaft for Tacoma, 4-Runner, Prado, T-100 & Tundra
25-7/8" - 32-1/8"

Toyota 8" & 8.4" Nitro Chromoly CTL Axle Toyota, Nitro Chromoly Rear Cut to Length Axle Shaft

Price: $202.13

Product Code: AXT34060

Qty:

Description

Vehicle Applications

Warranty Information

Toyota 8" & 8.4"
Nitro Rear Chromoly Cut-To-Length Axle Shaft

Fits:
1979-1995 Pickup
1979-2004 Hilux (non US)
1981-1983 Trekker
1984-2002 4-Runner & Surf
1996-2002 Prado 90, Colorado & Meru
1993-1998 T-100
2000-2006 Tundra

Differential:	Toyota 8" or 8.4"
Length:	25-7/8" to 32-1/8"
Axle Splines:	30
Type:	Rear
Material:	Chromoly Steel
Manufacturer:	Nitro Gear & Axle
Warranty:	5 Years*

Tech Note:
*Note: Does not fit 2004-2006 Tundra Double Cab.

Toyota FJ Cruisers & 4Runners are well known for their strength & reliability all over the world. Out of the box they feature some pretty great drivetrain, but they do have their limits. The factory 30 spline semi-float axle shafts are not built to withstand the added stress of larger tires and heavy offroad use. Nitro Gear & Axle has addressed this by Heavy Duty Chromoly Rear Axles. Not only are these stronger than the stock shafts, they also cost less! Sold Individually (EA.)

Nitro Gear & Axle strives to provide the highest quality differential & axle components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro, we know differentials and know what it takes to provide you with high quality components.

Nitro Gear and Axle Premium Differential Ring and Pinion Gears, Axles and parts

WARNING:

This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov

*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion – Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.

Features

High strength Chromoly Material.
State of the art machining and heat-treating processes for precision fitment and increased strength.
Made in USA.

Share your knowledge of this product. Be the first to write a review »

Toyota 8" & 8.4" Nitro Rear Chromoly Cut-To-Length Axle Shaft

Fits:1979-1995 Pickup 1979-2004 Hilux (non US)1981-1983 Trekker1984-2002 4-Runner & Surf1996-2002 Prado 90, Colorado & Meru1993-1998 T-1002000-2006 Tundra

Toyota 8" & 8.4"
Nitro Rear Chromoly Cut-To-Length Axle Shaft

Fits:
1979-1995 Pickup
1979-2004 Hilux (non US)
1981-1983 Trekker
1984-2002 4-Runner & Surf
1996-2002 Prado 90, Colorado & Meru
1993-1998 T-100
2000-2006 Tundra