Home > Products > Axle Shafts & Kits > Rear Axle, Shaft > Ford > 8.8" >

Ford 8.8" Right Hand Nitro Rear Axle Shaft, 83-86 F150/Bronco
8.8" Ford RH Axle, 31 Spl, 83-86 F150/Bronco, 31-1/16", 5 Lug

Alternative Views:

Price: $161.70

Product Code: AXF880002

Description Vehicle Applications Warranty Information

Nitro Gear & Axle OE Replacement

1541h High Strength Axle Shaft
8.8" Ford
5 Lug, 5x5-1/2", 31 Spline, 31-1/16" Long
C-Clip, Right Hand Passenger Side OE Replacement

1983-1986 Ford F150 Pickup
1983-1986 Ford Bronco

Rear Differential: Ford 8.8" 10 Bolt
Axle Length: 31-1/16" Right Hand
Spline Count: 31
Wheel Bolt Pattern: 5 x 5-1/2"
Type: C-Clip
Bearing Surface: 1.620"
Hollander # 447-1340R
Ford Part # E3TZ-4234-D
Nitro Gear and Axle Nitro Tough Axles

Nitro 1541H steel and 4340 alloy & chromium and molybdenum alloy axles are commonly known as "Chromoly": Our OE replacement axles are made of 1541H steel for a 25-35% increase in strength over their stock counterparts. Nitro 4340 Chromoly axles are also heat treated but are designed with extra material for strength where it's needed. All of our axles are precision machined to OE specifications for excellent fitment.

1541H steel is a heat-treated, carbon steel with .41% or less of other impurities. The heat treatments make the metal harder, without making it brittle with a tensile strength of 181,000 psi. Up to 35% stronger than OE axles.

4340 Chromoly steel, is a lower carbon steel with a minimum of 10% chromium by weight. Known as a high strength, low carbon steel with a tensile strength of 228,000 psi opposed to OE standard 1040 steel with a tensile strength of 110,000 to 130,000 psi.

That means they take more punishment, to get you further down the trail or off the trail entirely. That's Nitro Tough.

Nitro also offers extra long-splined shafts which can be cut to length and blank shafts for custom spline machining. Each new product is subjected to multi-point inspections and then actually installed and set up by Nitro's own in-house differential professionals to ensure excellent fitment and easy setup. At Nitro, we strive to meet the demands for new ratios and applications and we are continually developing new products to stay ahead of the competition.
CNC precision machining & heat treating processes ensure excellent fitment and overall strength.
Our heat treatment is applied after the splines are cut which allows for deeper penetration where strength is needed.
We have a rapid and ever-growing range of products to meet new demands and applications.

Nitro Gear and Axle Premium Differential Ring and Pinion Gears, Axles and parts

Nitro Gear & Axle strives to provide the highest quality differential & axle components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro, we know differentials and know what it takes to provide you with high quality components.

Share your knowledge of this product. Be the first to write a review »