Home > Products > Axle Shafts & Kits > Rear Axle Upgrade Bundle Packages >

Chromoly Rear Axle Shaft Bundle with Auburn Ected, 35 Spline for Dana 44
Dana 44 Chromoly Rear Axle Shaft Bundle with 35 Spline  Auburn Ected Air Locker


 
Nitro 35 Spline JK Rear Axle Bundle Kit
Price: $1,375.00


Product Code: AXD44JK-35AG
Qty:

Description Vehicle Applications Warranty Information
 

Nitro Gear & Axle
Chromoly Rear Axle Shaft Bundle
with 35 Spline Auburn ECTED E-Locker for Dana 44

Fits:
2007-2018 Jeep Wrangler JK Rubicon



Rear Differential: Dana 44
Axle Spline Count: 35
Axle Material: 4340 Chromoly Steel
Gear Ratio: All Ratios



Kit Includes:
1 Auburn ECTED E-Locker: AG5450211
Nitro Chromoly Dana 44 JK Rear Axle Kit: AXDana 44JK-35-REAR

NITRO TOUGH

Nitro 1541H steel and 4340 alloy & chromium and molybdenum alloy axles commonly known as "chromoly":
Our OE replacement axles are made of 1541H steel for a 25-35% increase in strength over their stock counterparts. Nitro 4340 chromoly axles are also heat treated but are designed with extra material for strength where it's needed. All of our axles are precision machined to OE specifications for excellent fitment.

Triple drilled axles flanges will accept 5 on 4.5", 5 on 5" (standard JK pattern) or 5 on 5.5" wheels. Studs are pressed into 5 on 5 pattern as shipped from Nitro.

The axles included in this bundle kit comes completely assembled. Studs pressed in, axle bearings, retainers, tone rings and seals pressed on ready to bolt into your factory housing. Most other brands do not supply the complete parts and do not pre-assemble them requiring either purchasing additional components or removing them from your old axles rendering them useless as spares or to sell used.

The Auburn Gear Ected Max Solid Locker This is the only aftermarket locker that delivers on-the-go-system engage. And the only one with the traction control of a limited-slip differential plus the capability of a true locker. All other aftermarket differentials must be operated in either the "open" differential mode or the "locked" mode. Not Ected Max!

Caution:
Ected Max is a high-performance locker. Engage the Ected Max on the fly at any reasonable speed when all four wheels are on the ground.




WARNING:

This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov


The Dana 44 Trademarks referred to herein is trademark of Dana Limited. The Dana 44 Trademark is used for informational purposes only, and there is no connection between Nitro Gear & Axle or JT's Parts & Accessories and Dana®.

Features
  • Nitro Axle Features:
  • Chromoly steel is 40-50% stronger than OEM axles
  • 5 Year Warranty*
  • CNC precision machining & heat treating processes ensure excellent fitment and overall strength.
  • Our heat treatment is applied after the splines are cut which allows for deeper penetration where strength is needed.
  • We have a rapid and ever growing range of products to meet new demands and applications.

  • ECTED Max™ Advantages:
    Gearing is made from aircraft quality, 9310 heat-treated billet steel to make it as tough as nails!
  • Can be switched on or off “on the fly,” at any road speed.
  • Does not have any shift forks or pins that must be lined up to obtain locker mode.
  • Quiet – say good-bye to noisy lockers!
  • Backed by an industry-leading one-year warranty, just like all Auburn Gear Performance Differentials.
  • Backed by the industry-exclusive program. D-REX = Differential – Replacement EXchange Program.
  • Can be used in front axle applications – with or without lockout hubs.
  • The only selectable locker that offers both limited slip and locker modes.

Share your knowledge of this product. Be the first to write a review »