Home > Products > Installation Kits > Master Install Kits > Dana Housings > Model 30 >

1992-1996.5 Jeep Grand Cherokee, Crush-Sleeve, Front, Nitro Master Install Kit for Dana 30
Dana 30 Front Nitro Master Install Kit


 
Dana 30™ Front Nitro Master Install Kit-CS
Price: $162.77


Product Code: MKD30-CS
Qty:

Description Vehicle Applications Warranty Information
 

Dana 30
Crush-Sleeve
Nitro Master Install Kit

Fits:
1992-1996.5 Jeep Grand Cherokee


Differential: Dana 30 Long Pinion Crush Sleeve
Gear Ratio: All Ratios
Ring Gear Bolts: 10
Manufacturer: Nitro Gear & Axle

Recommended:
3 quarts of Nitro Synthetic Plus Gear Lube

Tech Note:
OEM gears used a crush sleeve for pinion pre-load.
When using Nitro gears the crush sleeve is eliminated and shims are used with a new outer pinion bearing.

Includes Conversion Bearing & Shims

Kit Includes:

Inner Pinion Bearings & Races
Outer Pinion Bearings & Races
Carrier Bearings/Races
Pinion Nut
Pinion Nut Washer
Pinion Seal
Inner Slinger
Outer Slinger
Crush Sleeve for OEM gears
Pinion Depth Shims
Pinion Preload Shims for aftermarket gears
Carrier Shims
Inner Axle Seals
Ring Gear Bolts
Gasket or Silicone
Loctite
Marking Compound and applicator brush

The kits assembled by Nitro Gear & Axle only use the highest quality bearings available from Timken & Koyo. Nitro Gear & Axle does not use any cheap Chinese bearings. By using only Timken & Koyo bearings just like all of the OEM vehicle manufacturers you can be assured that your differential will be reliable, durable, & quiet for years to come.

Nitro Gear and Axle Premium Differential Ring and Pinion Gears, Axles and parts

Nitro Gear & Axle strives to provide the highest quality differential components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro, we know differentials and know what it takes to provide you with high quality components.

The Dana 30 Trademark referred to herein is a trademark of Dana Limited. The Dana 30 Trademarks is used for informational purposes only, and there is no connection between Nitro Gear & Axle or JT's Parts & Accessories and Dana .



WARNING:

This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov

Features
  • All the parts needed to install either OEM or Aftermarket gears!

Share your knowledge of this product. Be the first to write a review »