Home > Products > Axle Shafts & Kits > Rear Axle, Shaft > Dodge & Chrysler > 9.25" Chrysler >

9.25" Chrysler Rear Axle Shaft 31 Spline 34-1/16", 94-06 Dodge Ram 1500
9.25" Chrysler Rear Axle Shaft, 5x5.5" Bolt Pattern, 94-05 Dodge Ram 1500 2wd & 4wd, 34-1/16", 31 Spl, 1.618" Jrnl

Alternative Views:

Price: $195.20

Product Code: AXC52067614

Description Vehicle Applications Warranty Information

Nitro Gear & Axle
1541h High Strength Axle Shaft
9.25" Chrysler C-Clip Rear Axle Shaft
Fits Both Right Hand Passenger & Left Hand Drivers Side
5 Lug 31 Spline, 34-1/16" Long

1994-2006 Dodge Ram 1500 2wd & 4wd

Rear Differential: Chrysler 9.25" 12 Bolt
Axle Spline Count: 31
Axle Shaft Length: 34-1/16"
Wheel Bolt Pattern: 5 X 5-1/2
Bearing Surface: 1.620"
Hollander #: 447-2030
OEM Part #: 52067614AC

Associated Replacement Parts:
Axle Bearing & Seal: AK6408

Nitro Gear and Axle Nitro Tough Axles

Nitro 1541H steel and 4340 alloy & chromium and molybdenum alloy axles commonly known as "chromoly":
Our OE replacement axles are made of 1541H steel for a 25-35% increase in strength over their stock counterparts. Nitro 4340 chromoly axles are also heat treated but are designed with extra material for strength where it's needed. All of our axles are precision machined to OE specifications for excellent fitment.

1541H steel is a heat treated, carbon steel with .41% or less of other impurities. The heat treatments make the metal harder, with out making it brittle with a tensile strength of 181,000 psi. Up to 35% stronger than OE axles.

4340 cromoly steel, is a lower carbon steel with a minimum of 10% chromium by weight. Known as a high strength, low carbon steel with a tensile strength of 228,000 psi opposed to OE standard 1040 steel with a tensile strength of 110,000 to 130,000 psi.

That means they take more punishment, to get you further down the trail or off the trail entirely. That's Nitro Tough.

Nitro also offers extra long-splined shafts which can be cut to length and blank shafts for custom spline machining. Each new product is subjected to multi-point inspections and then actually installed and set up by Nitro's own in-house differential professionals to ensure excellent fitment and easy setup. At Nitro we strive to meet demands for new ratios and Fits and we are continually developing new products to stay ahead of the competition.

• CNC precision machining & heat treating processes ensure excellent fitment and overall strength.
• Our heat treatment is applied after the splines are cut which allows for deeper penetration where strength is needed.
• We have a rapid and ever growing range of products to meet new demands and Fits.

Please contact us with your specific questions and inquiries.
Nitro Gear and Axle Premium Differential Ring and Pinion Gears, Axles and parts


This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov

  • Manufactured from 1541h material which is 25% stronger than stock
    1 Year Warranty

Share your knowledge of this product. Be the first to write a review »