Nitro Pinion Yokes-
Nitro offers a wide variety of pinion yokes for many differentials. From replacement cast yokes to billet & forged high strength racing yokes, Nitro is sure to have the yoke you need.
Check out some of Nitro's applications:
| Item | Description |
| YOKC7290-STRAP | 7290 U-JOINT STRAP KIT (4 BOLTS + 2 STRAPS) |
| YOKC8.25-1310-27S | CHY 8.25" 27 SPL 1310 STRAP YOKE (XJ) |
| YOKC8.25-1310-27U | CHY 8.25" 27 SPL 1310 U-BOLT YOKE (XJ) |
| YOKC8.25-7260 | 7.25" & 8.25" CHY PINION YOKE, 7260 W/ STRAP KIT |
| YOKC8.75-1350-10C | 8.75" YOKE, 10 SPL 1350 CAST YOKE, USES STRAPS |
| YOKC8.75-1350-10F | 8.75" FORGED YOKE, 10 SPLINE 1350 HD, COARSE, (STRAP) INCL STRAP KIT |
| YOKC8.75-1350-10U | 8.75" YOKE, 10 SPL 1350 EXTRA HD ALUMINUM, COARSE |
| YOKC8.75-1350-29U | 8.75" YOKE, 29 SPL 1350 YOKE |
| YOKC8.75-7260-29 | 8.75" & 9.25" YOKE, 29 SPL 7260, SMALL, FINE |
| YOKC8.75-7290-10B | 8.75" 7290 BILLET STEEL YOKE, COARSE (U-BOLT) |
| YOKC8.75-7290-29 | CHY 8.75" 29 SPL 7290 YOKE |
| YOKD30JK-24 | D30 & D44 JK FRONT PINION FLANGE |
| YOKD36-LH | D36 VETTE SIDE YOKE (LH) 27 SPL |
| YOKD36-RH | D36 VETTE SIDE YOKE (RH) 27 SPL |
| YOKD44-1310-26S | D30, D44, D50 FINE PINION YOKE 1310 (STRAP STYLE) |
| YOKD44-1310-26U | D30, D44, & D50 FINE (NOT HD) 1310 YOKE, U-BOLT TYPE & D300 |
| YOKD44-1330-26S | D30, D44, & D50 STRAP (NOT D44HD) (1330, 1-1/16" CAP) PINION YOKE, FINE SPLINE |
| YOKD44-1330-26U | D30, D44, & D50 U-BOLT (NOT D44HD) (1330, 1-1/8" CAP) PINION YOKE, FINE SPLINE |
| YOKD44-1350-26S | D30, D44, D50 FINE PINION YOKE 1350 (STRAP STYLE) |
| YOKD44HD-LH | 84-96 VETTE D44HD LH SIDE YOKE |
| YOKD44HD-RH | 84-96 VETTE D44HD RH SIDE YOKE |
| YOKD44HD-SNAP | SNAP RING ONLY 0.090" DANA 44HD VETTE SIDE YOKE |
| YOKD44JKREAR-24 | DANA 44 JK REAR PINION FLANGE |
| YOKD60-1310-29S | D44-HD, D60, & D70 1310 STRAP TYPE PINION YOKE |
| YOKD60-1310-29U | D44-HD, D60, & D70 1310 U-BOLT PINION YOKE |
| YOKD60-1330-29S | D60 & D70 1330 PINION YOKE, 1-1/8" STRAP STYLE |
| YOKD60-1330-29U | D60 & D70 1330 PINION YOKE, 1-1/8" (U/BOLT NOT STRAP) |
| YOKD60-1350-29S | D60 & D70 1350 YOKE, 1-3/16" (STRAP STYLE) |
| YOKD60-1350-29U | D60 & D70 1350 YOKE, 1-3/16" (U_BOLTS INCLUDED) |
| YOKD60-1410-29S | D60 & D70 1410 YOKE, 1-3/16" STRAP TYPE |
| YOKD60-1410-29U | D60 & D70 1410 YOKE, 1-3/16" (U_BOLT_DESIGN) |
| YOKD60-7290-29 | D60, & D70 YOKE, 29 SPL, 7290 LRG |
| YOKD80-1410-37S | D80 PINION YOKE, 1410, STRAP DESIGN |
| YOKD80-1480-37S | D80 PINION YOKE, 1480, STRAP DESIGN |
| YOKF100600 | 10.25" SHORT YOKE, 1330, 1992 & DOWN, U-BOLT |
| YOKF100601 | 10.25" SHORT SPLINE YOKE, 1350, 1992 & DOWN, STRAP |
| YOKF100602 | 10.25" FORD LONG SPL YOKE 1330, 1993 & UP U-BOLT |
| YOKF100603 | 10.25" LONG YOKE, 1350, 1993 & UP, STRAP |
| YOKF100604 | 10.25" & 10.5" SHORT SPLINE YOKE, 1410, 1992 & DOWN STRAP |
| YOKF100605-UB | 10.25" & 10.5" LONG SPLINE YOKE, 1410, 1993 & UP U-BOLT |
| YOKF100606 | 10.5" FORD ROUND PINION YOKE, FLANGE |
| YOKF800600 | (GOOD USED) 8" FORD PINION YOKE, 1310 |
| YOKF880600 | 8.8" FORD PASS & 8.8IFS TRK ROUND FLANGE (4.3" O.D.) |
| YOKF880601 | 8.8" FORD PINION YOKE, 1330, TRUCK OR PASS |
| YOKF880602 | 8.8" FORD TRUCK ROUND YOKE (5" O.D.) FLANGE |
| YOKF880603 | DRIVESHAFT FLANGE FORD 8.8" TO 1310 |
| YOKF880622 | 8.8" FORD 1350, FORGED YOKE |
| YOKF880631 | 8.8" FORD PINION FLANGE, 05 & NEWER MUSTANG W/ CV SPLIT DRI |
| YOKF9-1310-UBKIT | FORD 8" & 9" 1310 & 1330 U/BOLT KIT (2 U-BOLTS & 4 NUTS) ALSO 10.25" 1330 |
| YOKF9-1350-28C | 9" 1350 28 SPL CAST YOKE, STEEL 3-7/8" OA LENGTH |
| YOKF9-1350-28F | 9" 1350 28 SPL FORGED YOKE, 4140 STEEL 3-7/8" OA LENGTH |
| YOKF9-1350-35-B | 9" 1350 35 SPL BILLET YOKE, 4140 STEEL.. |
| YOKF900600 | 9" 1330 28 SPLINE YOKE, 4" LENGTH OVERALL 1-1/8" CAPS |
| YOKF900601 | 9" 1310 28 SPL YOKE, 4" LENGTH, FOR USE WITH STOCK PIN SUPPORT |
| YOKF900602 | 9" 1330 28 SPLINE YOKE, 5" LENGTH OVERALL 1-1/8" CAPS |
| YOKF900603 | 9" 1330 28 SPL YOKE, 4" LENGTH, 1-1/8" CAPS, FOR USE WITH DAYTONA SUPPORT |
| YOKF900604 | 9" 1310 28 SPL YOKE, SHORT FOR DAYTONA SUPPORT, 4" LENGTH |
| YOKF900631 | 9" 1310 28 SPL YOKE, FOR DAYTONA SUPPORT, 4" LENGTH, 4130 FORGED |
| YOKF900663 | 9" 1350 35 SPL FORGED YOKE, STRONGER THAN BILLET |
| YOKF975600 | 9.75" FORD ROUND PINION YOKE FLANGE |
| YOKGM12-1310U | 12P, 12T, & 63-74 CI VET 1310 YOKE, U-BOLT DESIGN |
| YOKGM12-1350-A | 12P & 12T 1350 ALUMINUM PINION YOKE |
| YOKGM12-1350-C | 12P & 12T 1350 CAST YOKE (STRAP STYLE) |
| YOKGM12-1350-F | 12P & 12T 1350 FORGED YOKE |
| YOKGM1310STRKIT | GM 8.5F, 12P, & 12T 1310/1330 BOLT & STRAP KIT |
| YOKGM1350STRKIT | GM14T 1350/1410 BOLT & STRAP KIT |
| YOKGM14039582 | 7.2" GM PINION YOKE |
| YOKGM14T-1350-U | GM 14 BOLT 10.5" 1350 U-BOLT YOKE |
| YOKGM14T-1410-30S | 14T & 11.5" PINION YOKE, 1410 STRAP TYPE (NOT COMMON) W/O STRAPS |
| YOKGM15579602 | 9.5" GM PINION YOKE, 1350, USES GM3920486 STRAPS |
| YOKGM15588336 | USE YY GM8.5-M3R |
| YOKGM26006975 | 7.5" GM PINION YOKE, ASTRO VAN, OUTSIDE CLIPS, 1350 |
| YOKGM3879208 | GM 12P, 12T, & 65-79 CI VET 1330 YOKE, STRAP DESIGN (DISCONTINUED FROM GM) |
| YOKGM3996118 | 12P, 12T, & 63-74 CI VET 1310 YOKE, STRAP DESIGN |
| YOKGM3RSTRKIT | 7.5" REAR & 8.5" REAR U/JOINT BOLT & STRAP KIT, MECH 3R |
| YOKGM40007479 | 11.5" & 14T AAM 1480 PINION YOKE (W/ VIB. DAMPNER |
| YOKGM40015850 | 7.5" & 7.625" GM PINION YOKE, INSIDE CLIPS, M3R, TRIPLE LIP DESIGN |
| YOKGM55-1310-17 | 55P & 55T 1310 U-BOLT TYPE PINION YOKE |
| YOKGM7827670 | USE YY GM40015850 |
| YOKGM8.2-1310-25 | 8.2" GM 1310 U-BOLT TYPE PINION YOKE |
| YOKGM8.2-3R | 8.2" GM M3R U-BOLT TYPE PINION YOKE |
| YOKGM8.2-SLEEVE | 8.2" BOP SLEEVE FOR 8.2" CHEVY YOKE INTO A BOP DIFF |
| YOKGM8.2BOP-3R | GM 8.2 BOP & 8.5" OLDS, 27 SPL, MECH 3R |
| YOKGM8.5-1310 | 8.5" GM 1310 PINION YOKE (U-BOLT) |
| YOKGM8.5-1350-C | 8.5" GM 1350 PINION YOKE CAST, USES STRAPS |
| YOKGM8.5-M3R | 8.5", 8.6", 8.25" & 9.25" IFS PINION YOKE, INSIDE CLIPS, M3R (8.5" NEED REDI SLEEVE REMOVED) |
| YOKGMVETSTUB-17U | 63-79 CI VETTE INNER STUB AXLE (U-BOLT) 17 SPLINE |
| YOKM20-1310-28S | M20 1310 PINION YOKE (STRAP STYLE) |
| YOKM20-1310-28U | M20 1310 PINION YOKE (U-BOLT STYLE) |
| YOKM35-1310-26S | M35 1310 PINION YOKE, STRAP TYPE |
| YOKNP205-1350-10 | NP205 10 SPLINE 1350 TRANSFER CASE YOKE |
| YOKNP205-1350-32 | NEW PROCESS 205 1350 T/CASE YOKE, 32 SPLINE |
| YOKNP205-1410-32 | NEW PROCESS 205 1410 T/CASE YOKE, 32 SPLINE |
| YOKT26011 | 8" & LC SMALL HOLE YOKE, FINE SPL, 82 & DOWN, 27 SPL |
| YOKT35040 | 8", V6, FJ80 FRONT, LARGE & SMALL HOLE YOKE, 83 & UP, 27 SPLINE, 12 HOLES |
| YOKT35100 | T8 & T8S YOKE 29 SPL, 05+ TACO 66MM X 66MM LARGE PATTERN (SPICER SHAFT) |
| YOKT35110 | T8S & T8 W/ ELOC 05+ TACO 66MM X 66MM PATERN 29 SPLINE |
| YOKT38000 | TOYOTA DRIVESHAFT FLANGE TO MATE TO TRIPLE DRILLED PINION YOKE |
| YOKT39000 | TOYOTA LC DRIVESHAFT FLANGE TO MATE TO TRIPLE DRILLED PINION YOKE |
| YOKT41204 | 69-78 TOY LC YOKE, FINE SPL (CHECK PATTERN) 27 SPL |
| YOKT60030 | 78-97 TOY LC & 05+ TACO W/SPICER U/JT, 27 SPL, 66X66 & 60X68 PATTERNS |
Nitro Solid Preload Spacers-
Nitro's Solid Pinion Preload spacers increase durability and integrety of your setup, by eliminating the use of a crush sleeve. Once preload has been set, it will not change, and allows you to swap yokes, or seals in the future without worry of over-crushing the factory crush sleeve. Nitro offers the widest variety of solid preload spacer kits around.
| SK CSC8.75 | 8.75" CHRYSLER '89' CASE |
| SK CSF9-35 | 9" LARGE PINION |
| SK CSF9-STD | 7.5", 8.8", & 9", 10.25" FORD |
| SK CSGM12P | GM 12 BOLT CAR |
| SK CSGM12T | GM 12 BOLT TRUCK |
| SK CSGM7.5 | GM 7.5" & 8.2" |
| SK CSGM8.5 | GM 8.5" & CHRYSLER 9.25" |
| SK CST100 | TOYOTA 8.4" T100, TUNDRA, TACOMA |
| SK CST8 | TOYOTA 8" 4CYL |
| SK CSTLC | TOYOTA LANDCRUISER 9.5" |
| SK CSTV6 | TOYOTA 8" V6 |